Faura is a trade-only interior design showroom & residency in Westminster, London, offering Italian furniture, lighting, stone and finishes for interior designers, architects and contractors.

Where is the Faura showroom located?

Faura is located at 75 Page Street, Westminster, London SW1P 4EJ, United Kingdom.

Who can visit the Faura showroom?

The showroom is trade-only: independent interior designers, architects, design studios and contractors. Visits are by appointment.

How do I book an appointment at Faura?

Book a private visit via the appointment page at https://faura.global/appointment or email showroom@faura.global.

Where can I buy Holz in Form panels in London?

Interior designers, architects and developers can specify and order Holz in Form through Faura at the Faura Interior Design Residency in Westminster, SW1, by appointment.

Where is Holz in Form made?

In Germany. Holz in Form panels are made by VD Werkstätten in Bad Salzuflen, which has its own research and development department, tool shop and production facility.

What are Holz in Form panels made of?

Real wood veneer and melamine resins on a particle board core. The panels are embossed on one side and are 18.5 mm thick.

Can I get Holz in Form CAD files or technical data?

VD Holz in Form publishes formats, thickness and pattern repeats for each structure, along with an online catalogue and a sample request service. Faura can request samples and technical data for each structure in a specification.

How much do Holz in Form panels cost?

It depends on the specification: the structure, the veneer, the quantity and the finishing. Faura prepares trade quotations for each project.

What are the lead times for Holz in Form?

They vary by structure, veneer and quantity. Faura confirms timing for each order.

Are Holz in Form panels supplied finished?

No. Panels such as Diamond and Ribbed are supplied raw and unlacquered. Faura confirms the finish with the joinery maker as part of the specification.

What sizes are Holz in Form panels?

Sizes vary by structure. Diamond panels measure 3,135 × 1,270 mm and Ribbed panels 2,450 × 1,050 mm, both 18.5 mm thick.

Can Holz in Form be used for furniture fronts?

Yes. VD Holz in Form makes structures for furniture, interior and contract furnishing, and VD Werkstätten also produces curved, lacquered, embossed and lightweight fronts.

Germany · Embossed wood-veneer panels · More than 50 years

Holz in Form in London

Specify Holz in Form structured wood-veneer panels for walls, joinery and furniture fronts through Faura at the Faura Interior Design Residency, Westminster, SW1.

Holz in Form (VD Holz in Form) is the panel brand of VD Werkstätten, a German maker of embossed real-wood veneer panels based in Bad Salzuflen, with more than 50 years in the furniture industry. Its three-dimensional structures, from the faceted Diamond to the linear Ribbed, are used for wall elements, furniture fronts and contract interiors. At the Faura Interior Design Residency in Westminster, SW1, interior designers, architects and developers can compare Holz in Form structures with the stone, timber and fabrics of a scheme, and specify and order them through Faura. Visits are by appointment.

Wall of cabinetry with Holz in Form Diamond embossed wood-veneer fronts and lit open shelving — Cabinet fronts in the Diamond structure, an embossed real-wood veneer panel. Image: Holz in Form.

Holz in Form at a glance

Company: VD Werkstätten GmbH & Co. KG, maker of VD Holz in Form panels
Based in: Am Hasselbruch 3, Bad Salzuflen, Germany
Heritage: More than 50 years, starting as a supplier to the local furniture industry
Production: Its own research and development department, tool shop and production facility, with 80 employees
Panels: Embossed panels of real wood veneer and melamine resins on a particle board core, 18.5 mm thick, supplied raw and unlacquered
Structures: Four families: Classic, Authentic, Linear and Modern structures
Through Faura: Specified and ordered through Faura at the Faura Interior Design Residency, Westminster, SW1 (trade, by appointment)

Holz in Form through Faura

Faura specifies and orders Holz in Form panels for wall cladding, joinery and furniture fronts on trade projects.

Range	Holz in Form	Through Faura
Modern structures	Diamond, Big Diamond, Paillette and Weave	Specified for feature walls and cabinet fronts
Linear structures	Ribbed, Rod, Reed, Stripes, Lines, Cave and Trapez	Specified for wall panelling and joinery
Authentic structures	Chopped Wood, Burned Wood, Flamed Wood, Old Nature, Spalt and Borke	Specified and ordered through Faura
Classic structures	Wave, Dune, Sisal, Schilf, Ocean, Vienna, Looma and Wicker	Specified and ordered through Faura
Fronts and components	Curved, lacquered, embossed and lightweight fronts, interior door decks and table elements	Specified with the joinery maker

Alpine hotel bedroom with a Holz in Form Diamond embossed oak veneer wall behind the bed — The Diamond structure on a bedroom wall in a project in the Alps. Image: Holz in Form.

Holz in Form 2667 Ribbed embossed panel in knob oak veneer with vertical round ribs — 2667 Ribbed, a linear structure, in Knob Oak veneer. Image: Holz in Form.

What Holz in Form makes

VD Holz in Form makes structures for furniture, interior and contract furnishing: embossed panels that give real wood veneer a three-dimensional relief. Beyond standard panels, VD Werkstätten produces semi-finished parts and finished furniture components, including curved, lacquered, embossed and lightweight fronts, interior door decks and table elements.

Classic structures: including Wave, Dune, Sisal, Schilf, Ocean and the newer Looma and Wicker, a wicker-inspired weave.
Authentic structures: rustic, aged-looking surfaces such as Chopped Wood, Burned Wood, Flamed Wood, Old Nature, Spalt and Antikwood.
Linear structures: ribs, rods and grooves such as Ribbed, Rod, Reed, Stripes, Lines and Cave.
Modern structures: geometric reliefs such as Diamond, Big Diamond, Paillette and Weave.

Products · Media and catalogue · References

Diamond and Ribbed

Diamond: inspired by the facets of real diamonds, with a pattern that repeats every 223 × 194 mm. Panels measure 3,135 × 1,270 mm and are offered in Knob Oak, Old Oak, smoked oak and grey oak veneers, or with a lacquerable foil.
Ribbed: a straight, round, bar-shaped structure, with embossing 7.5 mm wide and 1.2 mm deep. Panels measure 2,450 × 1,050 mm, in veneers such as Knob Oak and heartwood walnut, or with a lacquerable foil.

Both are 18.5 mm thick on a particle board core, embossed on one side and supplied raw and unlacquered, so they can be finished to suit the scheme. The first dimension gives the direction of the embossing.

2536 Diamond · 2667 Ribbed

Who Holz in Form suits

Residential and hospitality projects that want a tactile timber surface on walls, wardrobes, kitchen fronts or reception counters, with the warmth of real wood veneer and a consistent, repeatable relief across large areas.

Specifying Holz in Form through Faura

01
Compare structuresBook a private visit to the Residency in Westminster and compare Holz in Form samples with the stone, timber and fabrics of your scheme.
02
Choose structure and veneerSelect the structure, veneer and embossing direction for each surface, and the finish to be applied.
03
Coordinate with the joinerFaura confirms panel formats and quantities and coordinates them with the joinery or fit-out contractor.
04
Order and deliveryFaura places the order and arranges delivery to the workshop or site.

Book a private visit Apply for trade access

Frequently asked questions

Where can I buy Holz in Form panels in London?: Interior designers, architects and developers can specify and order Holz in Form through Faura at the Faura Interior Design Residency in Westminster, SW1, by appointment.
Where is Holz in Form made?: In Germany. Holz in Form panels are made by VD Werkstätten in Bad Salzuflen, which has its own research and development department, tool shop and production facility.
What are Holz in Form panels made of?: Real wood veneer and melamine resins on a particle board core. The panels are embossed on one side and are 18.5 mm thick.
Can I get Holz in Form CAD files or technical data?: VD Holz in Form publishes formats, thickness and pattern repeats for each structure, along with an online catalogue and a sample request service. Faura can request samples and technical data for each structure in a specification.
How much do Holz in Form panels cost?: It depends on the specification: the structure, the veneer, the quantity and the finishing. Faura prepares trade quotations for each project.
What are the lead times for Holz in Form?: They vary by structure, veneer and quantity. Faura confirms timing for each order.
Are Holz in Form panels supplied finished?: No. Panels such as Diamond and Ribbed are supplied raw and unlacquered. Faura confirms the finish with the joinery maker as part of the specification.
What sizes are Holz in Form panels?: Sizes vary by structure. Diamond panels measure 3,135 × 1,270 mm and Ribbed panels 2,450 × 1,050 mm, both 18.5 mm thick.
Can Holz in Form be used for furniture fronts?: Yes. VD Holz in Form makes structures for furniture, interior and contract furnishing, and VD Werkstätten also produces curved, lacquered, embossed and lightweight fronts.

Related brands

Browse every brand in the brands directory, or see finishes and materials in London.

Sources: VD Holz in Form — Home · Company · Products · 2536 Diamond · 2667 Ribbed.

Last updated 27 October 2026.

Book a private visit

See Holz in Form in person at the Faura Interior Design Residency in Westminster. Appointments are held Monday to Friday, 09:00–18:00.

Book a private visit Apply for trade access All brands

Faura Interior Design Residency · Westminster, London SW1 · showroom@faura.global